| Customization: | Available |
|---|---|
| Type: | pH Electrode |
| Cooling System: | Radiator |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Characteristic
Non-contact test
Judge electricity wire line
Distinguish the zero line
Shows the intensity of the radiation
Sound and light alert
Safe and reliable
Can induce strong electric field radiation
Break point detect
LED lighting function, easy to work in dark environment
Pen clip design, easy to carry
Auto power off function
Specification:
AC voltage detection, High/low sensitivity, Flashlight, Auto power off .
Voltage test range: High sensitivity, 12~1000V ,Low sensitivity, 48~1000V.
Safety Compliance: CAT III 1000V or CAT IV 600V, IP54.
Battery life: 6 hours continuous use,stand by time up to 1.5 years.
Alarm mode: different frequency of sound and different color of led lamp.
Showing electric field intensity:the more LED lights lit, the stronger the electric field intensity.
Operation description:
1.Press the power key quickly, Buzzer beeps, Power indicator lights up and entered the test state. When the power on, power key was pressed again
and the buzzer turned to shut down and power off.
2.When the power is on, the low sensitivity test state is defaults.
3.The sensitivity / flashlight key (less than 1 second) can be switched at high and low sensitivity.
4.When the sensitivity indicator light is lit, it is a highly sensitive test state. Low sensitivity test state when extinguished.
5.Press the sensitivity / flashlight key and hold for more than 2 seconds. The flashlight is on; The flashlight is off by pressing the sensitivity / flashlight key
and holding for more than 2 seconds.
6.The voltage detector probe is placed near the AC voltage. When the detector is induced, the signal light will be on.
7.If the electric field signal becomes stronger, the signal light that indicates the field strength will be lit step by step.
8.After about 5 minutes without any operation and No signal detection, the voltage detector will be automatically off to extend the battery life.
9.When the battery voltage drops to less than 2.3 volts, the voltage detector will be off automatically, please replace the battery.
Power supply: two 1.5V AAA battery
Product size: 68x29x26mm
Product weight: about 49g (with battery)
Standard accessories: meter (without battery), battery
Packing details
Packing: single blister
Packing quantity: 160PCS/CTN
Carton size: 43x36x47.5CM
G.W. / N.W.: 12/11KG
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
){kind=link}